swt_low (2)
Buy



Technical
Specifications

Fors comes as Fors S, Fors M and Fors L, where Fors S comprises of 1 CAP 3D module, Fors M comprises of 2 CAP 3D modules and Fors L comprises of 4 CAP 3D for multiplied water delivering capacity.

Fors S

Fors M

Fors L

1 CAP 3D Module

2 CAP 3D Modules

4 CAP 3D Modules

System specifications

Electrical input
230 VAC 50 Hz
230 VAC 50 Hz
230 VAC 50 Hz
Power Consumption
210 - 300W
210 - 300W
210 - 300W
Water flow
Up to 700 L/day
Up to 1500 L/day
Up to 3000 L/day
SPECIFIC POWER CONSUMPTION
1,2 – 1,5 kWh/1000 L
1,0 - 1,2 kWH/1000 L
0,8 - 1,0 kWH/1000 L
PRODUCT SIZE (WxDxH)
850 mm x 560 mm x 1490 mm
850 mm x 560 mm x 1490 mm
1150 mm x 560 mm x 1640 mm
INSTALLATION SIZE (WxDxH)
1000 mm x 1400 mm x 2000 mm
1000 mm x 1400 mm x 2000 mm
1180 mm x 1400 mm x 2150 mm
TECHNOLOGY
CAP 3D
CAP 3D
CAP 3D
CONTAMINANT REMOVAL
Up to 90%
Up to 90%
Up to 90%
WATER RECOVERY
Up to 85%
Up to 85%
Up to 85%

Installations requirements

Level ground
230 VAC, 50 Hz (2.3 kW) electrical outlet
Service space: 0.5 metres on 3 sides (on top of installation size)
Available input water source (through a pump or faucet)
Ambient temperature up to 60 °C
Enclosed space with a roof

Module specifications

UNIT DIMENSIONS(L x W x H)
40 x 35 x 40 cm
40 x 35 x 40 cm
40 x 35 x 40 cm
power input
36W
36W
36W
module weight
13 kg
13 kg
13 kg
feed inlet coupling
1/2" PVC union (straight)
1/2" PVC union (straight)
1/2" PVC union (straight)
OUTLET COUPLING
1/2" PVC union (straight)
1/2" PVC union (straight)
1/2" PVC union (straight)
WATER PRESSURE INPUT
1 - 5 bar (15 - 75 psi)
1 - 5 bar (15 - 75 psi)
1 - 5 bar (15 - 75 psi)
WATER PRESSURE OUTPUT
0,6 - 4 bar (9 - 15 psi)
0,6 - 4 bar (9 - 15 psi)
0,6 - 4 bar (9 - 15 psi)
WATER RECOVERY**
80% (Programmable up to 85%)
80% (Programmable up to 85%)
80% (Programmable up to 85%)
SALT REMOVAL CAPACITY**
Programmable (20% - 90%)
Programmable (20% - 90%)
Programmable (20% - 90%)
POWER CONSUMPTION**
Approx. 0.9 kWh/1000 litres of water
Approx. 0.9 kWh/1000 litres of water
Approx. 0.9 kWh/1000 litres of water

Input water specifications

WATER TEMPERATURE
4-70°C
4-70°C
4-70°C
WATER PH
6 to 11
6 to 11
6 to 11
FEEDWATER TDS
Up to 1000mg/L
Up to 1000mg/L
Up to 1000mg/L
FEEDWATER Fe, Cu, Mn
< 50 ppm
< 50 ppm
< 50 ppm
WATER TURBIDITY
< 50 FNU
< 50 FNU
< 50 FNU
FEEDWATER HARDNESS
< 100 °dH
< 100 °dH
< 100 °dH
FEEDWATER CONDUCTIVITY
< 2000 uS/cm (@ 25 °C)
< 2000 uS/cm (@ 25 °C)
< 2000 uS/cm (@ 25 °C)
Download manual
See overview ->
Read tech specs ->
Buy Fors ->
Stockholm Water Technology AB
Contact